Molybdenum Lanthanum Alloy

Mo-La · LANTHANUM-OXIDE ADDITION · WIRE · STOCK · CUSTOM PARTS

Molybdenum Lanthanum Alloy

Mo-La products for furnace components and drawing-defined equipment parts. Select the product form, then specify lanthanum-oxide content, material condition, dimensions and acceptance requirements for your application.

Choose the Mo-La Product Form

Mo-La Wire

Define diameter, supplied length, straight or rolled delivery format and surface condition.

Mo-La Rod

Specify diameter, length, material condition, surface and any machined features.

Sheet & Plate

Include actual thickness, width and length, condition, surface and cutting requirements.

Mo-La Tube

Send outside diameter, wall thickness, length, end details and inspection requirements.

Boats, Racks & Heating Parts

The catalogue also lists Mo-La boats, racks and heating elements. Send a drawing with the working geometry, connections, material requirements, service environment and quantity for review.

Published Compositions & Sizes

Product / parameterPublished option / quotation requirement
Alloy chemistryRod, sheet/plate and tube descriptions list La₂O₃ content of 0.3–0.7%. Specify the oxide content, percentage basis and acceptance range for the selected form.
Wire chemistryThe wire entry names Mo-La without a numerical oxide content. Confirm its required chemistry rather than assuming a particular addition.
Wire dimensions and formatPublished diameter: 0.5–4.0 mm. Length to be specified; straight-wire or rolled-supply format to be agreed.
Rod dimensionsPublished diameter: 4–100 mm; length <2,000 mm. Confirm the actual size/condition combination.
Sheet and plate dimensionsPublished thickness: 4.75–50 mm. Width and length are not specified in the source catalogue; include both in the enquiry.
Flat-product process descriptionForging and rolling are listed catalogue routes. Agree the offered delivery condition and any required material records.
Tube dimensionsPublished diameter: 0.8–20 inches; length ≤106 inches. Wall thickness, construction and the actual dimensional combination need review.
Surface descriptionsWire: black oxide or chemically cleaned. Rod: black oxide, chemically cleaned or ground. Flat products: chemically cleaned or ground. Tube: rolled, chemically cleaned, polished or ground, as applicable.
Other productsMo-La boats, racks and heating elements, with geometry and material requirements to the agreed drawing.

Published ranges cover different catalogue configurations. Confirm chemistry, dimensions, condition and inspection for the actual product. Lanthanum-oxide addition is an intentional material constituent and must be specified separately from impurity limits.

Specify the Material and the Component

Oxide Content & Condition

Write the required La₂O₃ content and percentage basis, impurity limits and delivery condition. Identify any required material specification and documentation.

Geometry & Interfaces

Send dimensions, tolerances and drawing revision. For tubes, include wall thickness and construction; for fabricated parts, identify joints, supports and connection details.

Service & Acceptance

Describe the furnace atmosphere, temperature, loading and thermal cycles available for review. Agree inspection, identification, quantity and packing requirements.

Mo-La Alloy FAQ

The listed rod, flat-product and tube descriptions refer to La₂O₃, lanthanum oxide. State the oxide content and percentage basis explicitly; do not substitute an elemental-lanthanum percentage without agreeing the chemistry.

Confirm the selected form and required grade. The wire entry does not state a numerical addition; the other listed stock forms give a 0.3–0.7% La₂O₃ catalogue range.

Describe the planned fabrication and service. Ask the supplier to confirm the offered delivery condition and how it is identified; a material name alone does not establish its working or heat-treatment state.

Specify outside diameter, wall thickness, length, construction, end geometry and acceptance documents. Identify any required material or product standard precisely and confirm its applicability to the finished tube.

Send the complete drawing, material and condition requirements, quantity and intended operating environment. Include connections, critical dimensions and the inspection records required for the assembly.

Related Resources

Furnace & Crystal-Growth Components

Application background that includes Mo-La heaters, supports, shields and other refractory equipment components.

Molybdenum and Alloy Grade Selection

Material-family terminology to discuss when comparing pure molybdenum, Mo-La and other alloy options.

Prepare Your Mo-La Alloy Inquiry

Send the product form, La₂O₃ content and percentage basis, condition, dimensions, quantity and drawing. Include service conditions, impurity limits and the inspection documents required.

Request a Quote

Tell us what you need. A drawing or specification will help us review your project more efficiently.
Attach Drawing / Specification
Upload Drawing or SpecificationPDF, STEP, DWG, DXF, JPG or PNG · Max 5 MB
*Company e-mail address is preferred.