Menu
MetalsTek supplies indium metal, fabricated forms and deposition materials for joining, sealing, formulation and thin-film processes. Choose a product form below, or share your drawing and critical requirements for review.
Drawing-based sheet and foil projects can include custom geometry, inspection and product-specific packaging requirements. The featured project below shows how these were addressed for a completed ultra-thin indium sheet order.
Start with the process requirement, then use the product page to confirm the available form and project-specific requirements. The routes below are initial selection guidance, not universal material recommendations.
| Requirement | Recommended Form | Key Selection / RFQ Factor | Product Page |
|---|---|---|---|
| Flat interfaces, seals or drawing-based parts | Sheet & foil | Thickness, geometry, surface and handling | Sheet & Foil → |
| Continuous wire or wire placement | Wire | Diameter, length or spool format, intended process | Wire → |
| Melting or metal feedstock | Ingots & chunks | Feedstock form, impurity requirements and quantity | Indium Metals → |
| Blending, formulation or powder research | Powder | Particle size distribution, morphology, oxidation and packaging | Powder → |
| Thermal evaporation | Evaporation feed | Composition, feed form and source compatibility | Evaporation Materials → |
| Sputter deposition | Target | Composition, target geometry and backing/bonding requirements | Sputtering Targets → |
Final selection depends on the intended process, critical specifications and handling requirements. Detailed product specifications remain on the linked pages.
Project facts
0.05 mm thickness · 6,000 pieces · Custom dimensions · Delivered to Spain.
Engineering challenge
Soft, adhesive ultra-thin indium needed consistent geometry and careful handling across the batch.
Project response
Dedicated tooling, project-specific thickness and dimensional checks, and individual protective packaging supported production and delivery.
Dimensions and acceptance criteria were specific to this order.
View Full Case Study →
Discuss a Similar Indium Requirement →
Copper–indium alloy powder is listed in the portfolio. Specify the required composition, powder form and application for review.
Oxides: In₂O₃ and ITO.
Other compounds: InSb, InN, InAs, In₂S₃ and In₂Se₃.
Chemical forms: indium hydroxide, InBr₃, InI and indium acetylacetonate.
Specify the exact compound, required form, grade and documentation for review.
Wafers: indium antimonide and indium phosphide.
Other forms: ITO-coated glass and In₂Se₃ crystals.
For ITO sputtering targets, view the Indium Sputtering Targets product page.
Compare purity, particle size and oxidation considerations before specifying powder for your process.
Plan procurement documentation and delivery timing for advanced materials.
Choose the form required by your process. Sheet and foil support cut parts and seals; wire suits wire-feed or joining work; powder suits formulations; ingots and chunks provide metal feedstock; and deposition processes use evaporation materials or sputtering targets. The linked product pages provide the form-specific details.
Use the relevant product page for available grades, dimensions or particle sizes and the quotation requirements for that form. There is no single purity or size range that applies to every indium product. Include any critical impurity, surface or packaging requirement in your RFQ.
Yes. MetalsTek supports international supply of indium products. Applicable export documentation and shipment requirements are reviewed for the specific product, destination and intended use. Provide your destination and project details early so the quotation can include this review.
Share the product form, material or composition, critical specifications or drawing, quantity, application and delivery destination. Include important documentation or packaging requirements.
Available options, custom requirements and quotation scope are reviewed for the specific product and project.