
MOLYBDENUM · PIERCING TOOLING · SEED HOLDERS
Molybdenum tooling for seamless-tube piercing, with sapphire-growth seed holders offered as a separate component family. Send the tooling or holder drawing so the material, geometry and working conditions can be reviewed together.


Tooling for seamless steel-tube piercing. Specify the mandrel profile, material or additives, surface and the intended process.

A separate catalogue component for sapphire-growth furnaces. Choose the material and define the holder geometry and seed interface on the drawing.
| Parameter | Published option / quotation requirement |
|---|---|
| Mandrel material | Molybdenum with additives; specify the required chemistry for review. |
| Mandrel dimensions | Published envelope: diameter 20–250 mm × length 60–450 mm. Confirm the actual diameter/length/profile combination. |
| Mandrel density | Published catalogue reference: ≥9.2 g/cm³. Agree density and acceptance for the offered material state. |
| Mandrel surface | Published description: clean and smooth. Specify any measurable surface or finish requirement. |
| Seed-holder material | Pure molybdenum, TZM or Mo-La, specified separately. The source lists 99.95% for the pure-Mo option; agree alloy chemistry separately. |
| Seed-holder dimensions | Published diameters: 13 or 16 mm; lengths: 165 or 195 mm, or a drawing-defined configuration. Confirm the selected combination. |
| Seed-holder surface and use | Polished catalogue option for sapphire-growth furnace components. Define the seed interface, mounting and inspection requirements. |
Ranges describe catalogue configurations, not confirmed stock or every possible combination. Agree the drawing, material condition, tolerances and inspection documents for the actual component.
Provide the complete profile, radii, working length, connection and mating dimensions. Identify critical fits, surfaces and drawing revision.
Identify molybdenum or an agreed alloy, required condition and any composition or density acceptance. Keep mandrel and seed-holder material requirements separate.
For piercing tooling, describe the workpiece and process. For seed holders, send the furnace atmosphere, temperature, mounting and thermal-cycle information available.
They are separate component families on this page. Use the mandrel route for piercing tooling and the seed-holder route for sapphire-growth equipment; provide a drawing for the relevant part.
Send the drawing, revision, material requirement, quantity and intended process. Include critical profiles, fits, radii and surface requirements so the offered configuration can be confirmed.
Name the alloy and the required chemistry and delivery condition. A pure-molybdenum purity value does not specify an alloy. Agree the acceptance records needed for the quoted part.
Define any required property, test condition and acceptance criterion in the enquiry. Performance also depends on component geometry, material condition and the actual process; those requirements need review before quotation.
State the component identification, drawing revision, quantity, surface protection and documentation requirements. Include any special handling or cleanliness needs for the working surfaces.
Further reading on material selection and furnace-component applications.
Material-grade and alloy terminology to discuss before agreeing the mandrel or holder specification.
Application background for seed holders, supports and other refractory components within thermal equipment.
Send the part drawing and revision, component family, material or alloy requirement, quantity and operating conditions. Identify critical fits, surfaces, inspection and delivery requirements.