Menu
MOLYBDENUM · PELLETS · GRANULES · INGOTS & CHUNKS
Specify molybdenum metal by purity, physical form and the size required for your process. MetalsTek lists pellets, granules, ingots and irregular chunks, with size and purity requirements reviewed for each enquiry.
Published purity options are Mo 99.9–99.99%. State the required pellet dimensions or granule size range, quantity and any shape or handling constraints. Custom shape, size and purity requests are reviewed during quotation.
Existing catalogue illustration. The supplied shape is confirmed with the quotation.
The catalogue lists irregular molybdenum ingots and chunks at 99.9–99.99% purity, with custom size and purity requests. Define the required piece size or piece mass rather than assuming a standard ingot geometry.
| Parameter | Published option / enquiry requirement |
|---|---|
| Material | Molybdenum metal (Mo). |
| Published purity options | Mo 99.9–99.99% for the listed pellet/granule and ingot/chunk options. Define the required grade and impurity limits. |
| Pellet / granule form | Pellets, granules and custom shapes; size is specified with the enquiry. |
| Ingot / chunk form | Irregular form; custom size. Confirm acceptable piece dimensions, piece mass or size distribution. |
| Custom requests | Shape, size and purity can be submitted for review; feasibility and availability are established by quotation. |
| Quantity and documentation | Provide order quantity, packing requirements, delivery destination and the chemical or other acceptance documents required. |
The listed purity range describes catalogue options, not a measured result for an individual batch. No fixed pellet dimensions, chunk-size envelope, stock quantity or manufacturing route is stated on the current page; confirm those requirements with the quotation.
State the required Mo content and any element-specific limits. Include the purity calculation basis, analytical method and documentation where these govern acceptance.
For pellets, give diameter and length; for granules or chunks, define the acceptable size range, oversize limit or piece mass. Include the loading or handling constraints that affect the form.
Provide order quantity, packing quantity and required identification. Confirm which material or batch documents must accompany delivery.
If molybdenum is being specified as an evaporation charge, identify the deposition method, source holder or crucible, charge dimensions and cleanliness requirements. Pellet size and purity alone do not establish compatibility with a particular source assembly.
Define the receiving process, charge composition, required piece size and chemical limits. Confirm the selected material and documentation for the application rather than treating all molybdenum metal forms as interchangeable.
A catalogue purity range is not a certificate of analysis. Specify the required chemical limits, analytical basis, sampling and documentation during quotation. Any batch-specific statement must be supported by the relevant supplied report.
The existing catalogue describes tagged and externally labelled material with protective packaging. Confirm identification, package quantity, surface protection, storage or handling instructions and transport requirements for the selected form.
This page lists pellets, granules, ingots and irregular chunks. Custom shape, size and purity requirements can be submitted for review. Other product forms such as powder or fabricated components should be specified separately.
The published range for the listed metal forms is Mo 99.9–99.99%. State the required grade, impurity limits and documentation; the quotation confirms the agreed specification and availability.
No fixed dimensional range is stated here. Provide pellet diameter and length, or an acceptable granule/chunk size range or piece mass, together with order quantity and any loading constraints.
The catalogue value is not a batch test result. If you require chemical analysis or a certificate of analysis, agree the parameters, methods and documents with the order.
Send the required form, Mo purity and impurity limits, dimensions or piece-size range, quantity, intended process, packing requirements, documentation and delivery destination.
If your metal is intended as an evaporation charge, review source form, deposition method and source compatibility before finalising the enquiry.
Review how pure molybdenum and alloy designations differ. Use the agreed chemical requirements, rather than grade terminology alone, for your purchase.
Send the required metal form, purity and impurity limits, dimensions or piece-size range, quantity and intended use. Add packing, documentation and delivery requirements.