Notched Boat Sources

Overview

Notched Boats isolate the “hot zone” to the area between the notches.Choose a heater shape that best matches the substrate’s area requirements and the characteristics or form of material you plan to heat. When heating the same material multiple times, these boat heaters are sometimes satisfactory for more than a single-time use.

Notched Boats

Notched Boats

s21-std

#425MO: Molybdenum, 2.11 Volt, 123 Amps, 260 Watts, 1400°C
#426TA: Tantalum, 4.50 Volt, 138 Amps, 621 Watts, 1600°C
#427W: Tungsten, 3.26 Volt, 144 Amps, 469 Watts, 1800°C
#428MO: Molybdenum, 1.47 Volt, 184 Amps, 270 Watts, 1400°C
#429TA: Tantalum, 2.87 Volt, 198 Amps, 568 Watts, 1600°C
#430W: Tungsten, 3.28 Volt, 300 Amps, 984 Watts, 1800°C

Notched Boats

s22-std

#431MO: Molybdenum, 1.54 Volt, 122 Amps, 188 Watts, 1400°C
#432TA: Tantalum, 2.94 Volt, 150 Amps, 441 Watts, 1600°C
#433W: Tungsten, 3.32 Volt, 198 Amps, 657 Watts, 1800°C
#434MO: Molybdenum, 1.09 Volt, 190 Amps, 207 Watts, 1400°C
#435W: Tungsten, 2.55 Volt, 283 Amps, 722 Watts, 1800°C

Request A Quote
Attach a Drawing
*Company e-mail address is preferred.